Measurement process | Thermal conductivity |
Sampling | Analyzer extractive |
Connection | 6 mm pipe |
Dimensions (WxHxD in mm) | 145 x 80 x 85 |
Protection class | IP 67 |
Pressure-proof to | 20 bar absolute |
Power supply | 18 V to 36 V DC / 700 mA |
Ambient temperature range | -20° C to 50° C |
Weight | to 1800 g |
T90 time at 60l/h | < 1sec |
Communication: | |
RS232 | Yes |
Current output | 1x, 0/4-20 mA |
Voltage output | 2x, 0-10 V |
Display | Yes |
Relays | 3x |
Service program SetApp 2.0 | Yes |
Calibration on site | Yes |
Options: | |
Flow measurement | Yes |
Flow monitor | Yes |
Multi Gas Mode | Yes, additional up to 99 gas pairs |
Protection against corrosion | Yes |
Protection against condensate and dust | Yes |
Suitable for inflammable gases | Yes |
Additional Modules Compatible | Yes (O2) |
Moisture measurement | Yes |
Cross-sensitivity compensation | Yes, external signal required |
Specifications gas analysis: | |
Noise | 50 ppm |
Drift at zero point per week | 100 ppm |
Repeatability | 50 ppm |
Non-linearity | 50 ppm |
Measuring error with ambient temperature change per 10°K | 50 ppm |
Flow influence between 60 l/h and 90 l/h per 10 l/h | 50 ppm |
Fault with measurement gas change (Pabs > 800 hPa) per 10 hPa | 50 ppm |